Dji Phantom 2 Vision Plus No Video Feed
General Features
| header |
|
|---|
Transmitter
| Operating Frequency | 5.728GHz－5.8GHz |
|---|---|
| Communication Distance (open area) | CE: 300m; FCC: 500m |
| Receiver Sensitivity (1%PER) | -93dBm |
| Transmitter Power | CE: 25mw; FCC: 125mw |
| Working Voltage | 80 mA@6V |
| Battery | 4 AA Batteries |
Range Extender
| Operating Frequency | 2412-2462MHz |
|---|---|
| Communication Distance (open area) | 300m |
| Transmitter Power | <=17dBm |
| Power Consumption | 1.5W |
Aircraft
| Battery | 5200mAh LiPo |
|---|---|
| Weight (Battery & Propellers included) | 1160g |
| Hover Accuracy (Ready to Fly) | Vertical: 0.8m; Horizontal: 2.5m |
| Max Yaw Angular Velocity | 200°/s |
| Max Tilt Angle | 35° |
| Max Ascent / Descent Speed | Ascent: 6m/s; Descent: 2m/s |
| Max Flight Speed | 15m/s (Not Recommended) |
| Diagonal Length | 350mm |
| Tilting Range of Gimbal | 0°-60° |
Camera
| Resolution | 14 Megapixels |
|---|---|
| FOV | 120°/ 110°/ 85° |
| Sensor size | 1/2.3" |
| Functionality |
|
DJI VISION App
| System Requirement Of Mobile Device | iOS version 6.1 or above/ Android system version 4.0 or above |
|---|---|
| Mobile Device Support |
|
Phantom 2 Vision - Preparing to Fly
2014-03-19
DJI - Introduces Phantom 2 Vision & Vision+ Ground Station
2014-06-24
Phantom 2 Vision – Camera Firmware Upgrade
2014-01-24
Documents & Manuals
-
Phantom 2 Vision Release Notes
2015-04-27
-
Phantom 2 Vision User Manual (EN) v1.8
2015-01-30
-
Phantom 2 Vision User Manual (FR) v1.08
2014-02-18
-
Phantom 2 Vision User Manual (DE) v1.08
2014-02-18
-
Phantom 2 Vision Quick Start Guide (EN) v1.0
2013-10-30
-
Phantom 2 Vision Quick Start Guide (DE) v1.0
2013-10-30
-
Smart Flight Battery Safety Guidelines(EN, FR, DE and JP)
2014-10-15
-
Phantom 2 Vision Pilot Training Guide v1.0
2013-11-16
Software & Drivers
-
Phantom 2 Vision Assistant Software v3.8 （Stop distributing and updating)
2015-01-30
-
@Phantom 2 Vision Main Controller Firmware* v3.14
2015-04-27
-
@Phantom 2 Vision Central Board Firmware* v1.0.2.10
2014-11-28
-
Phantom 2 Vision Assistant Software v3.6 （Stop distributing and updating)
2014-10-31
-
@Phantom 2 Vision Main Controller Firmware* v3.08
2014-10-28
-
@Phantom 2 Vision Central Board Firmware* v1.0.2.10
2014-11-28
-
Phantom RC Assistant Software v1.2 （Stop distributing and updating)
2014-12-03
-
Phantom 2 Vision FC200 Firmware v1.1.9
2014-01-20
-
DJI WIN Driver Installer
2013-01-18
-
Phantom 2 Vision+ Assistant Software v3.8 （Stop distributing and updating)
2015-01-30
-
@Phantom 2 Vision Main Controller Firmware* v3.14
2015-04-27
-
@Phantom 2 Vision+ Central Board Firmware* v1.0.2.10
2014-11-28
-
Phantom 2 Vision Assistant Software v3.6 （Stop distributing and updating)
2014-10-31
-
@Phantom 2 Vision Main Controller Firmware* v3.08
2014-10-28
-
@Phantom 2 Vision+ Central Board Firmware* v1.0.2.10
2014-11-28
-
Phantom RC Assistant Software v1.2 （Stop distributing and updating)
2014-12-19
DJI Vision App
* Mobile Device Support: iPhone 4s, iPhone 5, iPhone 5s, iPhone 6, iPhone 6 Plus, iPod touch 5 (available but not recommended: iPad 3, iPad 4, iPad mini). Samsung Galaxy S3, S4, Note 2, Note 3 or Android phones of similar configuration.
Latest Version Information
| Items | Version | Date |
|---|---|---|
| DJI FC200 Camera | V1.1.9 | 2014-01-20 |
| 5.8GHz Remote Controller | V1.0.2.30 | 2014-11-04 |
| 5.8GHz Receiver | V1.0.1.3 | 2013-11-05 |
| iOS App | V1.0.54 | 2015-11-12 |
| Android App | V1.0.59 | 2015-10-08 |
| Phantom 2 Vision Autopilot System | V3.14 | 2015-04-27 |
| Phantom 2 Vision Central Board | V1.0.2.10 | 2014-11-28 |
| PC Assistant Software | V3.8 | 2015-01-30 |
| Mac Assistant Software | V3.8 | 2015-01-30 |
- * Disclaimer of Warranties:
SZ DJI Technology Co. Ltd. provides the firmware "as is" and "as available" for your use, without warranty of any kind, either express or implied, including all implied warranties of merchantability, and fitness for a particular purpose. You expressly agree that your use of, or inability to use the firmware is at your sole risk. In no case shall SZ DJI Technology Co. Ltd. be liable for any direct, indirect, punitive, special, or consequential damages arising from your use of any of the firmware, including but not limited to, any loss or damage of any kind incurred as a result of your misuse, transmitted, etc.
We will stop distributing and updating "Phantom 2 Vision Assistant Software v3.8, Phantom 2 Vision Assistant Software v3.6 ( for WIndows & Mac)" & "Phantom RC Assistant Software v1.2"on May 15, 2018, including adaptations to the new version of the operating system. After May 15, 2018, the software is still available for download. The server shutdown time will be announced separately. Looking ahead, DJI will continue to provide the best tools and services for users and developers.
- Ground Station
- 1.How do I set up vision ground station?
Vision Ground Station is built into the latest version of the Vision app (iOS: Version 1.0.41, Android 1.0.50). Simply update the app, open it and go to "Settings" to enable Ground Station. Accept the terms and conditions then return to "Camera" mode and swipe left to begin Ground Station flight planning.
- 2.What extra equipment do I need?
None. Everything needed for Vision Ground Station flight is built in to the Phantom 2 Vision and Vision+.
Just ensure that you are running the latest firmware (v3.04). Visit https://www.dji.com/sg/product/phantom-2-vision/download to download the latest firmware and installation instructions. - 3.What information do I need to know for my first Vision Ground Station flight?
Remember that launching from the ground, your Phantom will fly in a straight line to your first waypoint. Make sure you have enough clearance to travel up to the altitude desired for your flight plan.
- 4.What are the parameters of ground station control?
16 waypoints
200-meter height limit
5000-meter max flight distance
3 speedsFast 8m/s, Mid 4m/s, Slow 2m/s
- 5.What safety tips do I need to be mindful of?
Altitude is from ground, not from sea level. Make sure your preset flight is high enough to avoid obstacles Use Ground Station in open spaces to ensure a strong GPS signal and avoid planning flight paths near power lines.
- 6.How do I regain control of my phantom if I want to cancel my flight plan?
Quickly flip the S1 switch down and then back to GPS mode.
- 7.My phantom is not allowing me to set waypoints, why?
This could be caused by one of three things
1. You may be within an airport no-fly zone (within 8Km of major airports) or you may have no GPS lock. Move out of the no-fly zone to begin.
2. You have no GPS lock. Wait until your Phantom has full GPS lock i.e. 6 satellites or more.
3. You have not cached a map. Connect to the internet and download the map for your area. - 8.Is Vision waypoints available for the Phantom 2?
The Vision Waypoints system is not available for the Phantom 2, however the more complex Ground Station app for the Phantom 2 is. All that is required is the installation of a DJI 2.4G Bluetooth datalink: https://www.dji.com/sg/product/2-4g-bluetooth-datalink
- 9.Is Vision waypoints available for the Phantom 1 / FC40?
The Vision waypoints system is not compatible with the Phantom 1 or FC40
- 10.Is Vision waypoints available for the Naza?
The Vision waypoints system is not compatible with the Naza or the Naza-M, however the Naza-M can be used with iPad ground station.
- 11.Why can't I see a map?
An Internet connection is required to download the map. If flying in an area without internet access, you can cache the map by viewing it when an internet connection is available.
- 12.Can I see the map and camera live view at the same time?
No. The map and the camera are on different pages.
- 13.What are the red circles on the map?
These are airport safety zones. Waypoint flight is not permitted within this area.
- 14.Does this feature Point of Interest?
Point of Interest is not supported on the Vision waypoints system at this time.
- 15.Where do I download maps from?
Maps will be downloaded automatically through Google Maps when you view the waypoints page, as long as you have an internet connection.
- 16.Does the Phantom now follow?
The Phantom does not follow, however you can get a similar effect by programming the Phantom to fly your path, then setting an appropriate flight speed.
- 17.What happens if transmission fails during a mission?
The Phantom will continue on its mission.
- 18.What happens if video breaks during a mission?
The Phantom will continue on its mission.
- 19.What happens if the connection fails while hovering?
The Phantom will continue to hover for 1 minute then return to home.
- 20.My S1 switch is already in GPS mode but the Vision app keeps telling me I need to be in GPS. Why?
This is caused by a mismatch in firmware. Please make sure your firmware is as follows: App version 1.0.41, camera 1.1.9 and Naza-M 3.04
Source: https://www.dji.com/ae/mobile/phantom-2-vision
0 Response to "Dji Phantom 2 Vision Plus No Video Feed"
Post a Comment